en
Select category
Helsinki

Metal spraying equipment

Metal spraying equipment
1 / 11
Metal spraying equipment - photo 1 Metal spraying equipment - photo 2 Metal spraying equipment - photo 3 Metal spraying equipment - photo 4 Metal spraying equipment - photo 5 Metal spraying equipment - photo 6 Metal spraying equipment - photo 7 Metal spraying equipment - photo 8 Metal spraying equipment - photo 9 Metal spraying equipment - photo 10 Metal spraying equipment - photo 11
Renewed: 27 May 2022, 12:35 ID: 1718149
1/piece
Юрчук Иван Владимирович
руководитель отдела сбыта.

Description

The technology of cold gas-dynamic spraying is intended for applying powder paints to powder mixtures of metals (Al, Zn, Cu, Fe, Ti, Ni, Co, etc.), alloys (bronze, brass, stainless steel, etc.). , including those containing non-metals, polymers, etc. for metal and dielectric products, including ceramics and glass, as well as for sealing new materials. Coating is carried out by a fast flow of "cold" powder particles, which is accelerated by a supersonic gas flow at a temperature well below the melting point of the dispersed material.
Advantages:
• Requires only compressed air and 3.5 kW of electricity;
• No heating and oxidation of metal particles and substrate, deformation and change of metal structure (substrate temperature is below 100-150°C).
• Absence of harmful and aggressive gases, substances, radiation and other harmful factors.
• Technological simplicity of a covering.
Choice:
Name Model 102 PROFI
Types of sprayed metals Aluminium,
copper
Zinc
Power consumption 220 V 3.5 kW
Intake air pressure 0.5-0.8 MPa
(5-8 atm)
Compressed air consumption From 0.4 m3/min
The mass productivity of the coating applied to aluminum is 1-6 g/min.
(0.3-3 cm/min)
Number of temperature modes
Number of powder dispensers 2
Dimensions:
spray block 400*60 mm.
Device with powder dispenser 300x300x160 mm.
Weight
sprayer 1.3 kg.
Apparatus with powder dispenser 11 kg.

Phone: +380677236174
WhatsApp: +380677236174
Viber: +380677236174

The owner of the ad has the most up-to-date information.
Flagma member since 23 March 2019

Similar ads

6
Bitumen EMULSION SPRAYER BS-200
Bitumen EMULSION SPRAYER BS-200
Bitumen EMULSION SPRAYER BS-200
+2 photo
Bitumen EMULSION SPRAYER BS-200
Price
3,960/pc
Bitumen Emulsion Sprayer BS-200 from TM TICAB is an optimal equipment for small patching repairs, as well as for road works in a limited space (yards, alleys) and for sealing areas and cracks. With compact overall dimension – only 140 * 90 * 120 cm, the manual asphalt sprayer BS-200 can process...
+7 ads
25 Nov
2
Оборудование для переработки шин в крошки
Price
$38,000/pc
Equipment for processing tires into crumbs XKP - 560 (Capacity - 1000kg / h) Grinding group - Tire Sidewall Cutter - A sidewall cutter is needed to cut bead ring with metal wire from the tire for further processing.) - Waste Tire Strip Cutting Machine (Tape cutting machine, providing cutting...
+7 ads
11 Oct
Cold spray powders copper zinc
Price
1/pc
Powder A 3 Repair of corrosive and mechanical damage, spalling, holes, burnouts, filling cracks, gullies and other defects in aluminum, steel and cast-iron parts. advisory composition aluminum, zinc, corundum Powder A 2 Filling of cavities, pores, cracks and other defects in products made of...
+3 ads
27 May
Show more
Юрчук Иван Владимирович
руководитель отдела сбыта.
See more ads in the category Equipment, other
Contact information
Юрчук Иван Владимирович
руководитель отдела сбыта.
By phone
In messenger
Say, that you found an ad on Flagma
Safety rules: Do not agree to prepayment if you are not sure about the reliability of the user.
Write a message
Select category
×