02* MAN D2862LE436 V12-1800 marine engines NEW unused stock available

MAN D2862LE436 V12-1800 model. 2015 YOM new unused surplus
02 units available
Rated power 1800 HP / 1324 kW
Speed 2300 RPM
Engine family: D28MAINCR
Emission status: IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC

Leading time : ready from stock. Rejected project
We could completely check the engines and put them on the test bench with report before shipment

Conditions packaging & stock like military requirements, absolutely no consequences on the engines.
After complete rechecking we assume service agent warranty for 2 years. (MAN factory warranty already finished)

Technical specification (Scope of supply) sample : (pleasure yacht application)
------------
0002 Engine with standard parts
0800 Engine primer: beige
0412 Engine with pure white finish (RAL 9010)
0497 Valve hoods, standard
3705 Engine test report with charge certificates for crankshaft and connecting rod 1030/1031 Injection system common rail (MMDS can bus)
1100 Injection piping, standard
0015 Fuel filter, flame proof piping and hosing
1209 Fuel prefilter with water separator, change- over type, flame- proof, detached, hose Iine 1,5m
1505/1506 Electric starter, 24 v, 7,0 kw, 2-pole insulated
0141 Alternator 28 V, 120 A, 2-pole insulated. With a rectifier and regulator. Attached.
0040 Lube oil filter and oil cooler, combined, standard 2140/2141 Lube oil sump, standard 2305-2306 Mounting parts for oil drain 2500 Dry air cleaner (duralite)
0004 Exhaust turbocharger, water-cooled 0056 Exhaust manifold water-cooled 3902 Plate heat exchanger with surge tank 0301 Exhaust gas outlet, vertical 0295 Exhaust expansion joint 0321 V-belt guard, white
4850 Engine fitted PTO for attachment of a hydro-pump
4910 Integral Shaft Support with highflexible coupling for cardan shaft
0000 Cardan shaft Lz = 840mm
0256 Sea-water pump
4507 Flywheel 2,08 kgm2
7409 Terminal box with vision panel, including start / stop push-button, 5 m cable harness
2302 Electrical oil drain pump (24 v)
0156 Engine bracket at front end and rear end 0124 Resilient mounting
7631 Connecting plug with 20 m cable for boatyard connections 8511IMO technical file
0090 Engine trial run not attended by customer 0080 Engine data plate, German / English
9006 Service documentation on CD 0411 Packing for overland transport
7700 Wheelhouse monitoring unit CLC 6.5
7606 20 m connecting cable wheelhouse to diagnosis unit with terminating resistor
7685 Throttle control for wheelhouse (1 per boat)
7653 20 m connecting cable throttle control wheelhouse to electronic box
7740 Start/stop unit (EOP)
7742 Connecting cable start/stop unit (EOP) to terminal box 20 m
7635 2 m connecting cable terminal box engine 1 to terminal box engine 2 (1 per boat)
7237 10 m connecting cable terminal box engine 1 to terminal box engine 2 (1 per boat)